Boogie Channel Switch for Mesa Boogie Mark IV,(Rev B), Mark V - HANDMADE USA

Description

Boogie Switch - Mesa Boogie Mark IV,(Rev B), Mark V Channel footswitch
Part Number:
SW2-04 MiniL
Description
Mesa Boogie Mark IV or Mark V Two Button Footswitch
This replaces the monstrous Mesa foot board with a tiny little box.  My box will ONLY switch between channels 1, 2, & 3.  NO OTHER FUNCTIONS are possible with this switch.
This requires a stereo to mono cable or adapter such as the one pictured.  CABLE NOT INCLUDED.
NOTE:
Mark IV Rev(A) had a slightly different switching scheme.  This switch can still work but you will need to plug in a shorted out plug into the Channel One jack on the back of the amp.  I can hook up up with the proper plug if you have an early Mark IV.
Boogie (Mark V) Switch Operation
Plug a TRS cable into the left hand jack and use a adapter at the amp to split the TRS cable into two 1/4” Male Jack cables. Plug into Ch 2 & Ch 3 and set the selector knob to Ex. Sw.  To save your battery always unplug this cable when finished using the footswitch.
The left hand switch will select Ch 1. Anytime the green (CH 1) LED is lit, Ch 1 is active. I leave the LEDs for Ch 2 and Ch 3 active so you will know which channel you are selecting when you stomp on the left hand switch again. This will send control over to the right hand switch. You can use this switch to select between Ch 2 & Ch 3 at any time. For example if you are playing in Ch 2 and switch to Ch 1 and then your next switch is to Ch 3 you can stomp on the right switch while playing in Ch 1 to move control over to Ch 3 so when you stomp on the left switch again you will go instantly to Ch 3 - no toe dancing required. Should Ch 2 & Ch 3 be working backwards, switch the plugs in the back of your amp.
Thank you for choosing Sweet Foot Pedals and check out sweetfootpedals dot com for other rocking delights. And, as always, ROCK ON!
Features:
2 Button design
Latching switches
4” x 2” x 1”
Heavy duty aluminum enclosure
1/4" stereo (TRS) output
LEDs powered by internal battery
1/4" stereo (TRS) to dual mono cable required (NOT included)
Best aftermarket switches in the world!
November 28, 2018 by Matt
I make hundreds of footswitches and other devices along with the world’s finest power supplies, all
HANDMADE IN THE USA!
Additional Images